Requirements for the use of precision panel saws：

When working, the workpiece should be ensured to be fixed, and the positioning of the profile should conform to the direction of the knife, so as not to cause abnormal cutting, and do not apply side pressure or curve cutting.，

The feed should be stable to avoid the impact of the blade touching the workpiece, which will cause the saw blade to be damaged, or the workpiece to fly out, and accidents will occur.

When working, when abnormal sound and vibration, rough cutting surface, or odor are found, the operation must be terminated immediately and checked in time.，

Troubleshooting to avoid accidents.When starting and stopping cutting, do not feed too fast to avoid broken teeth and damage.

If you cut aluminum alloy or other metals, use a special cooling lubricant to prevent the saw blade from overheating, tooth paste, and other damage.，

Affect the cutting quality.The equipment chip removal tank and slag suction device ensure smooth flow to prevent slag accumulation into blocks, affecting production and safety.When dry cutting，

Please do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; for wet blade cutting, water should be added to cut, and beware of leakage.