For any novice carpenter, a table saw should be one of the first tools on your shopping list. It is your basic equipment and can help you complete a series of wood cutting tasks. However, if you want to * maximize the power of your tools, here are 15 table saw accessories you must have.

1. Saw blade

Regardless of the quality of the table saw itself, a good saw blade is also important. There are many types of table saw blades, including slitting blade, cross cutting blade and all-round blade. Do a good job of research and find * a saw blade suitable for your work, and the quality of work will be greatly improved.

2. High and low mountains

Most table saws have backers, but the quality is often not high. After the saw blade, this may be an important additional equipment you can buy. Some people even think that it is more important than the saw blade itself.

3. Angle push handle

Like the backers, many table saws have an angle push handle, but most of the self-made quality and accuracy are not very high. Some table saws do not even have this configuration. If you want to make a series of accurate angle cuts, a good angle push handle is definitely worth spending money.

4. Safety power switch

Table saws are dangerous in nature. They are one of the most dangerous tools in your workshop, but there is no need to be afraid of them. Because now a laptop operated safety switch can quickly avoid such dangers. If your table saw has problems, such as bite, rebound or other problems, cut off the power immediately with your knees, so that you can avoid accidents.

5. Push rod

Another * basic item you need to safely operate the table saw is the push rod. Up to now, * the most common type of table saw accident is that fingers touch the saw blade. This means that when dealing with smaller pieces of wood, you should always use a putter to push the wood instead of gambling with your fingers. Most table saws are equipped with push rods, but if your table saw does not have one, or your push rod has been lost or damaged, replace it immediately.

6. Push block

The function of push blocks is similar to that of push rods. They can let you push wood through the saw blade and reduce the risk of accidents involving your hands to a low level. Compared with ordinary putters, the push block allows you to grasp the material you are processing more firmly, and also ensures that your fingers are not damaged by the blade. They may be more expensive than simple putters, but if you value high-quality craftsmanship and your hands, buy them.

7. Feather board

The feather board is also designed to help you keep your fingers safe when pushing materials into the blade. Their role is to apply pressure on the wood, firmly fix it in position, and enable you to cut more accurately. If there is no feather board, you will need to apply this pressure with your hands, which increases the chance of accidents.

8. Clamp and slide rail

If you want to expand your cutting range, you can easily do this by building a collection of fixtures and slides. These will enable you to cross cut, bevel cut, and even cut wood circles.

9. Zero clearance protection plate

A zero gap protection plate, you can help improve dust collection, reduce tearing, and prevent small pieces of wood from being thrown out.

10. Mobile base

Although some table saws, such as on-site table saws or mini table saws, are designed for movement, larger table saws are difficult to move. If you attach importance to mobility, it is a good solution to install a mobile base for your table saw.

11. Power type twisted link belt

The standard belt Zui attached to the table saw will eventually wear out. They will become stiff, deformed and uneven, which will eventually affect the quality of your work. When replacing the belt, take advantage of the opportunity to upgrade your equipment and install the power torsion link belt. The service life of these belts is much longer than that of ordinary belts, and they can also make your saw run more smoothly and improve your cutting quality.

12. Dado knife

For cutting grooves, mortise eyes and serrations, dado knife is another important supplement to your table saw. A good dado knife is priceless for those who often need to perform such cutting.

13. Top Protector Kit

One of the keys to always achieving excellent results is to keep your table saw properly maintained and in good working condition. Part of it involves making sure your equipment doesn't rust, and this task is made easier by investing in a good top protection kit. A kit should include rust preventative, abrasive pads and everything else you need to keep your tools in perfect condition.

14. Angle measuring instrument

The ability to cut a series of precise bevels is very valuable to many carpenters, but sometimes the equipment you have on hand does not allow you to achieve the level of accuracy you need. Invest in a digital square. You just need to fix it on the blade to accurately read the angle, and then you just need to adjust the blade to the angle you need.

15. Divider

The divider on the table saw helps keep your material in place, prevents slippage and movement, and eliminates the tendency of wood to clamp the saw blade when you cut. Squeezing like this will lead to burnt edges in good conditions and dangerous rebound in bad conditions.

Unleash the full potential of your table saw

Although the basic operation of the table saw alone makes it an indispensable tool, it can do a lot if there are appropriate additional equipment. If you want to release the full potential of your table saw, you can consider these accessories. But don't spend impulsively, just choose what you need.