We must pay attention to the safe operation of mechanical equipment. Today, Xiaobian will take you to learn the safe operation method of the ideal equipment - precision sliding table saw.

Sliding table saw manufacturer - before using precision sliding table saw equipment, safety inspection must be carried out: check whether the nuts of the main saw and the slot saw are locked, and whether the rotation direction of the saw blade is correct; Whether there are foreign matters on the workbench.

Sliding table saw manufacturer - when using precision sliding table saw equipment, we must pay attention to the use of cross cutting guiding rule: there is a ruler on the guiding rule, set and lock the cross cutting guiding rule baffle according to the cross cutting width, stick the workpiece close to the guiding rule and baffle, press and hold the workpiece by hand, and push the sliding table to cut.

Sliding table saw manufacturer - when using precision sliding table saw equipment, we must pay attention to the use of longitudinal cutting guiding rule (longitudinal cutting fixed width): set and lock the longitudinal cutting guiding rule according to the longitudinal cutting width, stick the workpiece close to the longitudinal cutting guiding rule, press the transverse cutting guiding rule, and press and hold the workpiece by hand to push the sawing.

Push table saw manufacturer - when using precision push table saw equipment, we must pay attention to the sawing of narrow and short workpieces: when cutting workpieces less than 120mm, we should use push plates (which can be made by ourselves) to prevent hands from approaching the saw blade. When cutting, use the pusher to lean the workpiece against the guiding rule.

The sliding table saw manufacturer reminds you that you must pay attention to safety when operating machinery and equipment, operate according to regulations, and avoid accidents.