For any novice carpenter, the table saw should be one of the first tools on your shopping list. It is your basic equipment and can help you complete a series of wood cutting tasks. However, if you want Zui to give full play to the power of your tools, here are 15 table saw accessories you must have. Sliding table saw guiding rule

1. Saw blade

Regardless of the quality of the table saw itself, a good saw blade is also very important. There are many types of table saw blades, including saw blades for longitudinal cutting, saw blades for cross cutting, and versatile saw blades for both. Do a good job of research and find the saw blade that suits your needs, and the quality of work will be greatly improved.

2. High and low backers

Most table saws have backers, but the quality is often not high. After the saw blade, this may be the important additional equipment of Zui that you can buy. Some people even think it is more important than the saw blade itself.

3. Angle push handle

Like a backer, many table saws have an angle push handle, but the quality and accuracy of most self-made saws are not very high. Some table saws do not even have this configuration. If you want to make a series of accurate angle cuts, a good angle to push Jue is a sum of money worth spending.

4. Safety power switch

Table saws are inherently dangerous. They are one of the dangerous tools in your workshop, but there is no need to be afraid of them. Because now a lap operated safety switch can quickly avoid such a danger. If your table saw has problems -- such as bite, rebound or other problems, cut off the power immediately with your knees to prevent accidents.

5. Push rod

Another Zui basic item you need for a safety bench saw is the pusher. So far, the common type of table saw accident in Zui is that the finger contacts the saw blade. This means that when dealing with smaller logs, you should always use the putter to push the logs, rather than gambling with your fingers. Most table saws are equipped with push rods, but if your table saw does not have one, or your push rod has been lost or damaged, replace it immediately.

6. Push block

The function of push block is similar to that of push rod. They can let you push the wood through the saw blade and reduce the risk of accidents involving your hands to Zui low. Compared with ordinary putters, push blocks can make you grasp the material you are processing more firmly, and also ensure that your fingers are not injured by the blade. They may be more expensive than simple putters, but if you value high-quality craftsmanship and your hands, buy them.

7. Feather board

Feather board is also designed to help you keep your fingers safe when pushing materials into the blade. Their function is to exert pressure on the wood and firmly fix it in position so that you can cut it more accurately. If there is no feather board, you will need to use your hands to exert this pressure, which increases the chance of accidents.

8. Clamps and slides

If you want to expand your cutting range, you can easily do this by creating a set of fixtures and slides. These will enable you to cross cut, bevel cut, and even cut wood circles.

9. Zero clearance protection plate

With a zero gap protection board, you can help improve dust collection, reduce tearing, and prevent small pieces of wood from being thrown out.

10. Mobile base

Although some table saws, such as on-site table saws or mini table saws, are designed for movement, larger table saws are difficult to move. If you attach importance to mobility, installing a mobile base for your table saw is a good solution.

11. Power type twisted link belt

The standard belt Zui attached to the table saw will eventually wear out. They will become stiff, deformed and uneven, which Zui will eventually affect the quality of your work. When replacing the belt, take advantage of the opportunity to upgrade your equipment and install the power torsion link belt. The service life of these belts is much longer than that of ordinary belts, and they can also make your saw run more smoothly and improve your cutting quality.

12. Dado knife

For cutting grooves, sockets and sawteeth, dado knife is another important supplement to your table saw. For people who often need this kind of cutting, a good dado knife is priceless.

13. Top Protector Kit

One of the keys to always achieve excellent results is to keep your table saw properly maintained and in good working condition. Part of it involves making sure your equipment doesn't rust, and this task is made easier by investing in a good top protection kit. A kit should include antirust fluid, abrasive pads and everything else you need to keep your tools in perfect condition.

14. Angle measuring instrument

The ability to cut a series of accurate bevels is very valuable for many carpenters, but sometimes the equipment you have in hand is not allowed to reach the accuracy level you need. Invest in a digital square. You just need to fix it on the blade to accurately read the angle, and then you just need to adjust the blade to the angle you need.

15. Splitter

The divider on the table saw helps keep your material in place, prevents sliding and moving, and eliminates the tendency of wood to clamp the saw blade when you cut. Extrusion like this will lead to charred edges when Zui is good, and dangerous rebound when Zui is bad.

Unleash the full potential of your table saw push table saw guiding rule

Although the basic operation of the table saw alone makes it an essential tool, it can do many things if it has appropriate additional equipment. If you want to release the full potential of your table saw, you can consider these accessories. But don't spend impulsively, just choose what you Zui need.