1. The plate shall be close to the block and shall not be moved.

2. Adjust the cutting speed according to the thickness and hardness of the plate, and push the machine tool at a constant speed, not too fast or too hard.

3. When cutting small materials, wooden strips shall be used for pressing and pushing.

4. Operators shall wear masks instead of gloves and loose clothes.

5. It is not allowed to directly take things from the rotating saw blade by hand. If necessary, other long auxiliary materials can be used to push them away before taking them.

6. If the edges and corners of the sheet are defective, consider replacing the saw blade.

7. After the cutting task is completed, turn off the power supply and clean the sawing table and its surroundings.

Equipment maintenance-

1. according to the workload, dust removal shall be carried out inside the machine regularly to ensure the normal heat dissipation of the motor.

2 . Regularly remove dust from the sliding platform track to ensure the smooth operation of the sliding platform.

3. check the belt regularly and replace it in time in case of wear.

4. regularly inject oil into the parts of the machine body that need lubrication to ensure the stable and quiet operation of the equipment.

The manufacturer of sliding table saw guiding rule introduces the processing advantages of sliding table saw

1. the middle part of the sliding table saw is equipped with a saw blade cooling device, which is not easy to burn out and increases the service life of the saw blade. Sliding table saw guiding rule

2. the discharge end device is equipped with a material distribution guide device, which makes it difficult for the saw blade to fit and increases the smoothness of feeding.

3. the advance / retreat guide rail and feeding guide rail of the main shaft are supplied with oil by an automatic smooth pump, which effectively increases the service life of the guide rail.

4. three row tooth chain feeding, which is simple and saves money during maintenance. Jing close push table saw analyzes the difference between molded plate and blister plate:

1、 Molded board molded board is the suction board, which has been the mainstream material for furniture door panels in European kitchens, bathrooms and bathrooms. Since 1997, domestic enterprises have started to use it in their products. Its material is usually the door panel and decorative panel products formed by selecting excellent medium density board, milling and sanding, and then sticking the PVC film tightly on the surface based on the principle of vacuum absorption.

2、 Blister board is an amorphous, odorless, nontoxic, highly transparent colorless or yellowish thermoplastic engineering plastic. It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compression strength. Blister board is made of medium density board as the base material, with good surface flatness and simple modeling. After forming with carving and milling patterns, the patterns are diverse and have a three-dimensional sense. If the home decoration is European or rural style, it is recommended to choose blister.

3、 The difference between molded board and blister board. The base materials of molded board and blister board are medium density boards. Are they different? The answer is yes. The high-quality blister board is difficult to deform and crack, with fine appearance, good flame retardancy, wear resistance, heat resistance and scratch resistance. It is a kind of healthy and environmental protection board. The molded board is bright in color and clear in texture. It has its own characteristics. It is very good for decoration. However, it can not be contacted or close to high-temperature objects for a long time. It is simple to deform and crack. Its wear resistance and pressure resistance are not as good as that of the blister board. After a long time of use in the kitchen, it simply leads to the fading of the appearance color. Sliding table saw guiding rule