Sliding table saws can cut quickly and accurately and are widely used in the woodworking industry. However, no matter how good the machine is, it must be maintained. Otherwise, various failures are prone to occur, which will greatly affect the life of the sliding table saw. The impact of this, then, today’s editor has sorted out the daily maintenance methods of the sliding table saw.

　 Daily maintenance method of sliding table saw

　　1, regular dust removal

　　Because the sliding table saw produces a lot of waste and dust when cutting wood panels, it is necessary to regularly dust the inside of the sliding table saw to ensure the normal heat dissipation of the motor, and regularly perform dust removal operations on the table guide rails to ensure smooth operation of the table.

　　2, regular inspection

　　 Regularly check the parts of each part of the sliding table saw. If the screws are loose, tighten them immediately, and replace the belts if they are worn.

　　3, regular lubrication

　　If the sliding table saw works for a long time, some parts such as bearings will wear out and sometimes make noise. At this time, it is necessary to regularly lubricate important parts of the machine body to ensure stable and quiet operation of the equipment.

　　 4. Regular motor inspections

　　 Check whether the wiring of the motor is good, whether the current of each fixed part and the grounding circuit is normal, if any abnormality is found, you should immediately entrust an expert to repair it.

　　Only by correct daily maintenance of the sliding table saw can the machine work better and extend the life of the machine. If the sliding table saw itself is of high quality and excellent performance, daily maintenance is also very assured.